Enables LCD backlight lighting.
Specifies LCD display backlighting wakeup activity. Choice of: OFF, Keys (detect button press), Controls (gimbal stick/slider/knob/switch), Both (Keys or Controls), or ON (always on)
Telemetry; Displays the transmitters operating voltage
Battery Eliminator Circuit – a voltage regulator built into an Electronic Speed Controller (ESC) to power the radio receiver and servos. Can be either a linear design or a switching design – different merits for each.
Describes an RC helicopter that has a tail that is turned by the main drive gear using a toothed belt stretched over gears.
Enables background music
Background music volume
A “handshake” procedure to connect communications between a Tx and a given Rx. The Tx may bind with multiple Rx’s, but a given Rx may only bind with one Tx.
Bitmap (BMP) image files in raster image file format (64×32 pixels, 4-bit grayscale) used to store bitmap digital images
A small program that basically “wakes up” the STM chip in your radio. An initial bootloader was installed in the Taranis as shipped. After flashing the STM chip with OpenTX v2.x, a second bootloader exists on the chip. This bootloader … Continue reading
This special set of operating screens allows us to work directly off of the SD card to perform a number of tasks. We can flash a new version of firmware, look at and manipulate the contents of the folders on … Continue reading
When in Edit Settings in OpenTx Companion, you have a choice of the following options for building the system firmware that operates the Taranis: Noheli – removes the heli screens for simplicity if not needed Sq5font – a heavier weight … Continue reading
Describes the act of updating firmware in a device, usually by transfer of information from a computer connected to eh device. A synonym for flash
A communication system that transfers data between components inside a computer or between computers.
Beyond Visual Range