A1 and A2 are analog input channels on compatible telemetry receivers. A1 is most often used to report receiver voltage, and A2 pack voltage. A1 and A2 can report any value that can be represented as an analog voltage between … Continue reading
Variable
Telemetry; Acceleration in the X direction in Gs from the TAS-01 Acceleration Sensor (not an S.Port compatible device)
Telemetry; Acceleration in the Y direction in Gs from the TAS-01 Acceleration Sensor (not an S.Port compatible device)
Telemetry; Acceleration in the Z direction in Gs from the TAS-01 Acceleration Sensor (not an S.Port compatible device)
Airspeed in meters/sec or feet/second as reported by the airspeed sensor
Maxium airspeed in meters/sec or feet/second as reported by the airspeed sensor
Total mAh used as reported by current sensor. mAh measured
a, b and d – use assignable to control hardware … Continue reading
Current in Amps as reported by the current sensor.
Maximum current in Amps as reported by the current sesnor.
GPS distance from starting point. Used to display distance
GPS maximum distance from starting point. Used to display distance.
Difference in Total Energy to be reported by Airspeed Sensor
Telemetry; Fuel level
GV1 thru GV9: OpenTX provides Global Variables to store quantities for use in multiple functions without having to edit each function individually. Global variables also can be linked to a slider or rotary knob to adjust variables in flight.
GPS altitude above sea level
See Global Variables
GPS heading In degrees
A constant having value equal to +100.
Power attained (Watts) reported by Current Sensor. See: Powr+