Power attained (Watts) reported by Current Sensor. See: Powr+
Telemetry
Maximum Power attained (Watts) reported by Current Sensor. See: Powr
RPM (Revolutions Per Minute) reading.
Maximum RPM (Revolutions Per Minute) reading.
Receiver Signal Strength Indicator. A value transmitted by the receiver in your model to a receiver in your Transmitter that indicates how strong the signal is that’s being received by the model. When it drops below a minimum value, indicating … Continue reading
GPS ground velocity
GPS reported ground speed. See also Speed+
GPS reported maxium ground speed. See also Speed
Standing Wave Ratio is used as an efficiency measure for transmitting radio signals. Lower numbers are better with a 1:1 ratio being theoretical perfection of antenna performance. Best not to get hung up on this unless you’re a technical expert.
Telemetry; Temperature sensor readings. Typically T1, T2
A catch-all term for passing performance information from the model back to the RC pilot. This information can be quite extensive, and include RSSI, various voltages, GPS position, altitude, etc. Not all FrSky receivers are telemetry capable, but all of … Continue reading
SEE: Batt, SWR, RSSI, A1, A2, Alt, Rpm, Fuel, T1, Speed, Dist, GPS Alt, Cell, Cells, Vfas, Curr, Cnsp, Power, Accx, Accy, Accz
Abbreviation for Timer1 and Timer2 in the Telemetry menu. See Timer and Timers … Continue reading
Vertical Speed (Rate of Climb) reported in meters/second by variometer sensor.