↓

OpenTX University

A Brave New World

OpenTX University
Home Menu ↓
Skip to primary content
Skip to secondary content
  • Home
    • Site Map
  • Version 2
    • v2.1 Resources
    • v2.2 Resources
  • Undergraduate Courses
    • Introduction
      • How RC Works
      • Open Source Basics
      • OpenTX vs OpenTX Comp.
      • Why Upgrade?
    • Fund. of OpenTX (Win)
      • First Steps
      • Checking Out Taranis
      • Intro. to Zadig
      • Using Zadig
      • OpenTX Companion
      • Installing OpenTX Comp.
      • Working With Log Files
      • Configure Google Earth & Companion
      • Flashing OpenTX
      • Boot Loaders
    • Fund. of OpenTX (Mac)
      • Intro to DFU
      • Installing DFU
      • OpenTX Companion (Mac)
      • Installing OpenTX Comp. (Mac)
    • Radio Setup
      • Beginning Radio Setup
      • General Radio Settings
    • Taranis Prog. Review
    • Basic Plane Set Up w/Taranis
      • Basic Airplane Introduction
      • Important Info on Servo Travel
      • Startup Warnings, Main Screens, and Model Selection (1/13)
      • Model Set Up (2/13)
      • Skipping Lightly Through Heli & Flight Modes for Quality Time in Inputs (5/13)
      • Mixer (6/13)
      • Servos (7/13)
      • Control Chain Takeaways (What Goes Where)
      • Skipping forward to Telemetry (13/13)
      • Wrap Up
    • Non Fixed Wing
      • Helicopter
        • Helicopter Model Basics
        • Basic Heli Part 1: Setup
        • Basic Heli Part 2: Mixers
        • Basic Heli Part 3: Curves
        • OpenTX Heli Flight Modes
        • CCPM for Taranis
      • Multirotors
        • OpenTX and Multirotors
        • Using Flight Controllers
        • CleanFlight PID Tuning
    • Lua
      • Introduction to Lua Scripts
      • Beginning Model Scripting
  • Continuing Education
    • Introduction to Antennas
    • Creating A Model Image
    • Logical Switch Functions
    • Taranis SD Card Addendum
    • Taranis SD Card Storage
  • Glossary
  • OpenTX Manual
Home

Heli Setup

A B C D F G H I L N O P R S T W
Th To Tt

Throttle Cut

Posted on July 14, 2014 by Robert RussellJuly 14, 2014

A switch set up on a RC model Tx used to stop an internal combustion motor or an electric motor.

Posted in Heli Setup, Model Setup, Radio Setup

Throttle Hold

Posted on July 13, 2014 by Robert RussellJuly 14, 2014

A switch in a RC helicopter Tx set up that sets a heli throttle to low value regardless of any other input.  Often seen as another flight mode employing a separate pitch curve.

Posted in Flight Modes, Heli Setup

Torque Tube

Posted on July 14, 2014 by Robert RussellJuly 15, 2014

A type of RC helicopter having a tail rotor that is turned by the main drive gear using a rod that rotates inside the boom.

Posted in Heli Setup

TT

Posted on July 14, 2014 by Robert RussellJuly 14, 2014

Abbreviation for Torque Tube

Posted in Heli Setup
©  2014 - OpenTXU               All rights reserved.
↑