2.2.08 FrSky TARANIS Radio – Setting up and using the Trainer (Master/Slave) setup with a DX7 by Painless360 June 2015 (#10 of 13)

In this video he covers the following key topics – using the wizard to create an elevon mix automatically, duplicating a mixer manually, adding multiple inputs to a mixer, altering mixer direction and checking that the output works. In this … Continue reading

2.2.07 FrSky TARANIS Radio – Creating a custom mix for Elevons (flying wing) by Painless360 June 2015 (#7 of 13)

In this video he covers the following key topics – using the wizard to create an elevon mix automatically, duplicating a mixer manually, adding multiple inputs to a mixer, altering mixer direction and checking that the output works. – Introduction … Continue reading

2.2.03 FrSky TARANIS Radio – Adding extra channels and controls for a Multirotor, by Painless360 May 2015 (#3 of 13)

In this video he continues from the second video in the series, this time add two extra channels to the basic Multirotor/Quadcopter model created by the Wizard. He adds one to control the flight modes and another to operate a … Continue reading

Video

2.1.04 “OpenTX 2.0 and Beyond Episode 4 – Using the TX Wizard” (Nov 2014) by R. Scott Page

2.1.04 “OpenTX 2.0 and Beyond Episode 4 – Using the TX Wizard” (Nov 2014) by R. Scott Page

Tags: OpenTx 2.0, Wizard, Taranis Plus, Lua,

In this 7:00 minute video Scott demonstrates how to use the Model Setup Wizard with the Taranis Plus transmitter.  It runs on a LUA script so any transmitter running 2.0 can make use of this script. If you are upgrading to version 2.0 the Lua script for the Wizard can be downloaded on the SD card image that Scott maintains at https://dl.dropboxusercontent.com/u/1.


[weaver_youtube http://youtu.be/YdX3iW1dyk0]

Video

Companion 9X Configuration Wizard

“Companion 9X Configuration Wizard” (April 2013) by Scott Page

Using Companion 9X configuration wizard, setting rates and expo. With examples of a glider and flying wing.

Tags: Glider, Flying wing, rate, exponential, wizard

Index of video topics:
02:00 – 02:20 Opening Configuration wizard under model Templates
02:20 – 03:01 Making selections in the wizard
03:01 – 03:40 Modifying channels
03:40 – 05:30 Setting rates and exponential
05:30 – 06:10 Simulating settings
06:10 – 07:50 Creating a detailed glider with the wizard
07:50 – 09:15 Creating a flying wing

[weaver_youtube http://youtu.be/uSGzSf9jelg?list=UU-A2sf9a_BDbKs81HuU7p4w]