2.2.11 FrSky TARANIS Radio – Adding a 6 position switch (S3) and setup for APM/PixHawk by Painless360 June 2015 (#13 of 13)

[NOTE THE LINK IS NOT THE NORMAL YOUTUBE SHARE LINK. YOUTUBE REPORTS THIS AS AN UNLISTED VIDEO – WHATEVER THAT MEANS. In this video he adds a 6 position switch to the top of the radio, installing it as S3, … Continue reading

2.2.09 FrSky TARANIS Radio – Using Flight Modes and Global Variables (GV/GVR) by Painless360 June 2015 (#11 of 13)

In this video he covers the following key topics – using flight modes to display mode and text information on the display, using flight modes to have different trims for each mode and using flight modes to have Global Variables … Continue reading

2.2.08 FrSky TARANIS Radio – Setting up and using the Trainer (Master/Slave) setup with a DX7 by Painless360 June 2015 (#10 of 13)

In this video he covers the following key topics – using the wizard to create an elevon mix automatically, duplicating a mixer manually, adding multiple inputs to a mixer, altering mixer direction and checking that the output works. In this … Continue reading

2.6.07 FrSky TARANIS/Naze32 Telemetry – Simple setup using a D4R-II receiver by Painless360 June 2015 (#9 of 13)

In this video he covers telemetry with a Naze32 and a D4R-II receiver – how to wire it and set it up in Cleanflight. You can find the Cleanflight document that covers the use of the CLI command ‘set telemetry_inversion … Continue reading

2.6.06 FrSky TARANIS Radio – Introduction to Telemetry and alarms by Painless360 June 2015 (#8 of 13)

In this video he covers the following key topics – telemetry on a D4R-ii receiver, Smart Port Telemetry on a X8R receiver, how to configure on the radio, how to setup alarms, how to save data to the SD card … Continue reading

2.2.07 FrSky TARANIS Radio – Creating a custom mix for Elevons (flying wing) by Painless360 June 2015 (#7 of 13)

In this video he covers the following key topics – using the wizard to create an elevon mix automatically, duplicating a mixer manually, adding multiple inputs to a mixer, altering mixer direction and checking that the output works. – Introduction … Continue reading

2.2.05 FrSky TARANIS Radio – Dual Rates (D/R) and Expo (Exponential) setup by Painless360 May 2015 (#5 of 13)

In this video he covers the following topics – duplicating an input, editing an input to change the rates, adding exponential, selecting the dual rates using a switch and how to do all this through either the OpenTX Companion PC … Continue reading

2.2.04 FrSky TARANIS Radio – Using OpenTX Companion and curves by Painless360 May, 2015 (#4 of 13)

In this video he continues from the other videos in the series (uploading firmware, creating a basic model, adding extra channels manually) and now using the PC application OpenTX Companion used in the first video to upload the firmware to … Continue reading

2.2.03 FrSky TARANIS Radio – Adding extra channels and controls for a Multirotor, by Painless360 May 2015 (#3 of 13)

In this video he continues from the second video in the series, this time add two extra channels to the basic Multirotor/Quadcopter model created by the Wizard. He adds one to control the flight modes and another to operate a … Continue reading

2.2.02 FrSky TARANIS Radio – Introduction to TARANIS model setup basics by Painless360 May 2015 (#2 of 13)

In this video we Painless360 demonstrates the basics of setting up a simple model and key differences between the way that OpenTX is programmed and works when compared with a more traditional radio system. – Introduction (0:02) – How a … Continue reading

2.2.01 FrSky TARANIS Radio – One way to update the firmware by Painless360 May 2015 (#1 of 13)

To watch all of the videos in this series you can visit – https://www.youtube.com/playlist?list… In this first video in the Taranis video we update the firmware to the latest version using a PC and a USB cable. To do this … Continue reading