Video

2.1.05 “OpenTX 2.0 and Beyond Episode 5 – Upgrading a Taranis to OpenTX 2.0” (Nov 2014) by R. Scott Page

2.1.05 “OpenTX 2.0 and Beyond Episode 5 – Upgrading a Taranis to OpenTX 2.0” (Nov 2014) by R. Scott Page

Tags: OpenTx 2.0, Taranis, Upgrade

NOTE:The first time you power on the Taranis after upgrading it will prompt you to format the EEPROM. Check through all model settings after upgrading

In this 10:49 miniute video Scott updates a Taranis from stock firmware to OpenTX 2.0. He uses a computer that has never had any of the FrSky or OpenTX software or drivers previously installed on it.

The installation segment was filmed straight through in real time with no editing except to speed up a couple places so you would not watch a progress bar move slowly across the screen.

Installing OpenTX is not that difficult. Be sure to check out lessons on this and other OpenTX topics at Open-TX University – www.open-txu.org

Link:

[weaver_youtube http://youtu.be/hVWwInEAsa0?list=UU-A2sf9a_BDbKs81HuU7p4w]

Video

2.1.04 “OpenTX 2.0 and Beyond Episode 4 – Using the TX Wizard” (Nov 2014) by R. Scott Page

2.1.04 “OpenTX 2.0 and Beyond Episode 4 – Using the TX Wizard” (Nov 2014) by R. Scott Page

Tags: OpenTx 2.0, Wizard, Taranis Plus, Lua,

In this 7:00 minute video Scott demonstrates how to use the Model Setup Wizard with the Taranis Plus transmitter.  It runs on a LUA script so any transmitter running 2.0 can make use of this script. If you are upgrading to version 2.0 the Lua script for the Wizard can be downloaded on the SD card image that Scott maintains at https://dl.dropboxusercontent.com/u/1.


[weaver_youtube http://youtu.be/YdX3iW1dyk0]

Video

2.1.02 “OpenTX 2.0 and Beyond Episode 2” (October 2014) by R. Scott Page

2.1.02 “OpenTX 2.0 and Beyond Episode 2” (October 2014) by R. Scott Page

Tags: OpenTX 2.0, Information Flow, Channels; Controls

In this 12:15 minute video Scott discussing the information flow.  He explains the difference between channels and devices; input source / output control. Sources > Inputs > Mixer > Servos.  Demonstrates setting up these different items.

[weaver_youtube http://youtu.be/sfdnixAE_1A]

[TARANIS PLUS & OPENTX 2.0+; INTRODUCTORY SERIES]

Video

2.1.01 OpenTX 2.0 and Beyond Episode 1

Tags: OpenTX 2.0, Companion, Settings, Menu, Connecting
In this 8:53 minute video Scott provides an overview of OpenTX and OpenTX Companion. Topics include a comparison between the versions of the firmware and companion software. He addresses how to determine which version you have in the TX and PC, the new settings menu, and connecting to the TX with the new software.


[TARANIS PLUS & OPENTX 2.0+; INTRODUCTORY SERIES]